CNC Mill Automation System
The Mill Automation System mitigates operator labor shortages by increasing the productivity of your existing staff. Custom automation solutions built by robot system integrators often leave you dependent on the integrator to add new parts for automation; an expensive and time-consuming proposition. The Mill Automation System is a Standard Automation System that requires no robot expertise or robot programming to use. A Mill Automation System with MultiGrip automation work holding allows your machinists to easily add new parts just by cutting vise soft jaws. Changing between jobs takes just minutes, maximizing equipment and operator productivity. If your CNC parts can be held with a vise, they can almost certainly be automated with a Mill Automation System.
To apply for financing click HERE

No Programming Required:
Configuring new parts for automation has never been easier. The Mill Automation System includes the VersaBuilt System Controller (VSC). The VSC allows a machinist to configure a new part in just a few minutes. Using a web-based form, the machinist inputs part configuration parameters. Once the part configuration is saved, the CNC operator can select a saved part configuration and the VSC will show the operator exactly where to load material onto the VersaCart 1300. Once the material is loaded and part quantity is entered, pressing the cycle start button begins the automation process.
Consistent Help When you Need it:
Has a labor shortage affected production output in your shop? The Mill Automation System offers a reliable solution to labor shortages. VersaBuilt customers typically report a doubling of production output using half the labor. The Mill Automation System requires no robot programming expertise. With the included training package, your existing team can use the Mill Automation System like other tools in your shop; without the need to rely on expensive robot system integrators.


Unlimited Throughput:
Automating high-mix, low-volume production has been solved with VersaBuilt’s MultiGrip technology. MultiGrip allows machinists to automate as many new parts as needed, simply cut MultiGrip soft jaws to fit new parts. Included in the Mill Automation System is the MultiGrip Starter kit which includes everything needed to get your parts running automated in under a day.
Quick Assembly
The whole Mill Automation System can be installed and running parts in just one day. Our system is a ready to go product, made by machinists for machinists, to get your automation running faster than any other automation system available.


In-Depth Training
The Mill Automation System includes in-depth training courses tailored to the operator, machinist, and installer. The classes will take place over a video conference call and will typically last one to two hours each. This training will get your team and new system ready to automate as soon as possible.
Financing Available
Financing is now available through Reliant capital. If qualified, Reliant Capital offers six months of deferred payments:
- 4.99% APR
- 6 Months at $99
- 60 Months at $1,439.35
To apply, click HERE

Mill Automation System Contents
- VersaCart 1300 Robot Cart with Visual Infeed System
- MultiGrip Robot Gripper
- 2 MultiGrip Vises with hand valve for operator manual loading
- VersaBuilt System Controller
- MultiGrip Jaw Starter Kit
- VersaBlast In-CNC Part and Jaw Cleaning System
- All pneumatic valving and air lines
- One-on-one training for operators and machinists
- Detailed Instructions and online videos
- VersaBuilt Support Team to ensure your success
Mill Automation System
Mill Automation System with UR10e Robot Installed and Calibrated $74,995 – P/N 5010049
Mill Automation System Without Robot $24,995 – P/N 5008381
CNC Door Openers
VersaDoor Single Door 24″ $995 – P/N 5007494
VersaDoor Single Door 30″ $1095 – P/N 5006080
VersaDoor Single Door 40″ $1295 – P/N 5006549
VersaDoor Double Door 48″ $1595 – P/N 5007619
Door Sensor Kits
VersaDoor Sensor Kit Single $495
VersaDoor Sensor Kit Double $990
Accessories
2x Vise, 3-axis Subplate $995 – P/N 5010016
Z Push Tool $95 – P/N 5002394
Y Push Tool $95 – P/N 5002202