VersaDoor

See Options for Pricing

The VersaDoor is a simple, reliable and cost-effective CNC door opener. The VersaDoor comes with universal mounting brackets that allow it to be installed on almost any CNC machine. The VersaDoor is available in single door versions with 24″, 30″ or 40″ actuators and a double door version using two 24″ actuators. When not in use, the CNC door can be manually opened by an operator or the VersaDoor can be disconnected in about five minutes with simple tools.

Requires pneumatic valve kit sold separately or add your own pneumatic valve. Optional door sensor kit prevents robot from colliding with door in the event of a door opener failure.

Features

  • Fits almost any CNC machine
  • Easy to install
  • Control CNC door operation from robot IO
  • Requires 5 port 3 position center exhaust pneumatic valve kit available separately
  • Optional sensor kit allows the robot to validate door position before moving robot

CNC Door Openers

VersaDoor Single Door 24″ $995
VersaDoor Single Door 30″ $1095
VersaDoor Single Door 40″ $1295
VersaDoor Double Door 48″ $1595

Door Sensor Kits

VersaDoor Sensor Kit Single $495
VersaDoor Sensor Kit Double $990

Accessories

Z Push Tool $95
Y Push Tool $95

Please contact me with more information about CBC Automation Products

Versabuilt CNC Automation Products
VersaBuilt Warranty Seal

VersaDoor Sensor Kit

The VersaDoor Sensor Kit allows a robot to detect and verify the position of the VersaDoor. Without the VersaDoor Sensor Kit, robot processing becomes delayed as the robot must wait extra time to ensure door actuation is complete. If door acutation fails, the robot could hit the CNC door causing damage. With the VersaDoor sensor kit, the robot knows exactly when the door finishes opening or closing improving cycle time and preventing a possible crash with the CNC door. The robot can even monitor the door actuation time and notify the operator that the CNC door may need cleaning or other service if door actuation time increases. For Universal Robots, the included URCap integrates with the VersaDoor Sensor Kit simplifying robot programming.

Features

  • Allows robot to detect door open and door closed position
  • Mounts on pneumatic cyclinder simplifying installation and increasing reliability
  • Included URCap simplifies robot programming for Universal Robots

Ordering Information

VersaDoor Sensor Kit – Single  $495
VersaDoor Sensor Kit – Double  $990

Please contact me with more information about CNC Automation Products.

VersaBuilt Door Sensor Kit
This website uses cookies and asks your personal data to enhance your browsing experience.