CNC Automation Accessories

CNC Automation Accessories

It takes more than a robot and a gripper to make an automation project successful. VersaBuilt has been automating mixed-part CNC manufacturing for more than half a decade. We've developed a line of automation accessories designed specifically to improve the CNC automation experience. Buying automation accessories from VersaBuilt also buys the experience of our customer support team that are here to provide valuable expertise to help you tackle the toughest CNC automation challenges.

Buy With Confidence

All VersaBuilt CNC Automation Accessories come with a 2 year warranty

More Information

Related Products

MultiGrip CNC Workholding, MultiGrip Robot Grippers, CNC Automation Starter Kits for Universal Robots

VersaCart 10

The VersaCart 10 was designed specifically for 1.3 meter reach collaborative robots. The VersaCart 10 is sized to provide a generous infeed area yet is compact enough to fit in even the most crowded CNC spaces. The VersaCart 10 is CNC laser cut and formed from aluminum and powder coated steel for precision, durability and long life. The infeed area includes a visual grid for easy part alignment. The lower shelf provides storage for the robot controller and can also be used to store MultiGrip Jaws and MultiGrip Fingers. Up to eight MultiGrip Storage Plates can be attached to the VersaCart 10 to handle the most complex automation jobs or even allow the robot to process multiple parts simultaneously. The VersaCart 10 is mounted on heavy duty caster for portability and includes leveling feet to secure the VersaCart into position in front of the CNC. For even greater security, install two concrete anchors in your shop floor and the VersaCart can be secured tightly to your shop floor in minutes. For Universal Robots, the included URCap and sample programs greatly simplify setting up new automation processes.

Features

  • Almost 1800 square inches of infeed capacity
  • Visual grid part locating system
  • Casters allow for portability between CNC machines
  • Leveling feet secure VersaCart in place for processing
  • Designed for easy cleaning
  • Holds to 8 MultiGrip Storage Plates
  • Included URCap simplifies programming
  • Easy to assemble with basic tools in about 2 hours
  • Option to purchase pre-assembled
  • Shipping February 2020

Buy With Confidence

The VersaCart comes with a 2 year warranty

More Information

Related Products

MultiGrip CNC Workholding, MultiGrip Robot Grippers, CNC Automation Starter Kits for Universal Robots

Ordering Information

VersaCart 10 $4995
Pre-assembled VersaCart 10 $5995

VersaDoor

The VersaDoor is a simple, reliable and cost-effective CNC door opener. The VersaDoor comes with pneumatic valving and universal mounting brackets that allow it to be installed on almost any CNC machine. The VersaDoor is available in single door versions with 24", 30" or 40" actuators and a double door version using two 24" actuators. When not in use, the CNC door can be manually opened by an operator or the VersaDoor can be disconnected in about five minutes with simple tools.

Features

  • Fits almost any CNC machine
  • Included URCap simplifies robot programming for Universal Robots
  • Optional sensor kit allows the robot to validate door position before moving robot

Buy With Confidence

The VersaDoor comes with a 2 year warranty

More Information

Related Products

VersaDoor Sensor Kit, CNC Automation Starter Kits for Universal Robots

Ordering Information

VersaDoor Single 24" $995
VersaDoor Single 30" $1095
VersaDoor Single 40" $1295
VersaDoor Double 48" $1495

VersaDoor Sensor Kit

The VersaDoor Sensor Kit allows a robot to detect and verify the position of the VersaDoor. Without the VersaDoor Sensor Kit, robot processing becomes delayed as the robot must wait extra time to ensure door actuation is complete. If door acutation fails, the robot could hit the CNC door causing damage. With the VersaDoor sensor kit, the robot knows exactly when the door finishes opening or closing improving cycle time and preventing a possible crash with the CNC door. The robot can even monitor the door actuation time and notify the operator that the CNC door may need cleaning or other service if door actuation time increases. For Universal Robots, the included URCap integrates with the VersaDoor Sensor Kit simplifying robot programming.

Features

  • Allows robot to detect door open and door closed position
  • Mounts on pneumatic cyclinder simplifying installation and increasing reliability
  • Included URCap simplifies robot programming for Universal Robots

Buy With Confidence

The VersaDoor Sensor Kit comes with a 2 year warranty

Ordering Information

VersaDoor Sensor Kit Single $495
VersaDoor Sensor Kit Double $995

VersaBlast In-CNC Part and Jaw Cleaning System

The VersaBlast In-CNC Part and Jaw Cleaning System uses an air amplifier to generate a powerful blast of air from your shop air supply to remove chips and coolant from MultiGrip Jaws and Parts. After unloading MultiGrip Jaws from a MultiGrip vise, the MultiGrip Jaws must be cleaned before the jaws are reloaded into the MultiGrip Vise. VersaBlast is mounted inside the CNC to contain chips and coolant and includes a mounting bracket with powerful magnets that attaches VersaBlast securely to the sheet metal inside of the CNC. VersaBlast includes everything necessary to integrate VersaBlast into your CNC automation system including pneumatic valving, pneumatic hose with push-to-connect fittings.

Features

  • Amplifies volume of shop air by up to 25x to clean MultiGrip Jaws quickly and thoroughly
  • Universal mounting bracket allows VersaBlast to be mounted inside the CNC using powerful rare-earth magnets

Buy With Confidence

The VersaBlast comes with a 2 year warranty

Related Products

MultiGrip CNC Workholding, CNC Automation Starter Kits for Universal Robots,

Ordering Information

VersaBlast $495

Z Push Tool

The Z Push Tool is installed in a CNC tool holder and allows the CNC to push down on a part during a CNC settle routine. Applications requiring tight first operation to second parallesim tolerances and lightwieght parts will benefit from a CNC program that uses the Z Push Tool to force the part against it's Z datum in the vise.

Features

  • 1/2" Shank
  • Includes medium compound elastomer insert, other compounds available from McMaster-Carr

Buy With Confidence

The Z Push Tool comes with a 2 year warranty

More Information

Ordering Information

Z Push Tool $79

Y Push Tool

The Y Push Tool is installed in a CNC tool holder and allows the CNC to move a rectangular part along the Y axis of the MultiGrip Jaws during a CNC settle routine. Part that cannot be settled against a Y datum in the MultiGrip Jaws will benefit from a CNC program that uses the Y Push Tool to locate the part precisely in the MultiGrip Jaws after loading into a MultiGrip Vise.

Features

  • 1/2" Shank

Buy With Confidence

The Y Push Tool comes with a 2 year warranty

More Information

Ordering Information

Y Push Tool $59